Rod Ends Market: OverviewRod ends also known as heim joints or rose joints are a type of bearing used in oscillating assemblies to reduce friction. It consists of a bearing mostly spherical, in the eye-shaped head of the rod end housing with integral shank. The rod ends misalign axially and thus allows the machinery to work efficiently even under misaligned or oscillating conditions. The other advantages of rod ends are it helps in eliminating edge stress and the excessive stress caused by adjacent components within a working machinery. The rod ends can constitute of plain spherical, ball or roller bearing. The sliding surface of the bearing is mirror finished and hence it smoothly can rotate within the housing. The rod ends can be non-lubricating or self-lubricating. The non-lubricating rod ends are made up of steel and are used in applications which has shock loads, alternating heavy loads or static heavy loads. The non-lubricating rod ends are provided with grooves for lubrication. The self-lubricating rod ends which are maintenance free has a self-lubricating sliding surface in combination with steel. These rod ends are used in applications where the friction coefficient should be less and no re-lubrication facility is provided.
Rod Ends Market: Drivers and Restraints
The rod ends are used in wide applications like automobiles, aerospace, industrial machinery, construction, etc. as it supports a wide range of mechanical tolerances, which can boost the overall growth of the global rod ends market. The use of rod ends is cost-effective solution since it substitutes welded or more sophisticated assemblies, and is a major driving factor for global rod ends market. The properties of rod ends like robustness and less maintenance also contributes in the growth of global rod ends market.
The introduction of inexpensive, self-lubricating rod ends which do not require any re-lubrication or maintenance are anticipated to limit the growth of global non-lubricating rod ends market.
Rod Ends Market: Segmentation
On the basis of product type, the global rod ends market can be segmented as follows:-
Thread Types
Female thread
Right hand thread
Male thread
Right hand thread
Left hand thread
Welding Shank
On the basis of number of components, the global rod ends market can be segmented as follows:-
2 Piece
Ball
Body
3 Piece
Ball
Race
Body
On the basis of material, the global rod ends market can be segmented as follows:-
Steel/ Steel
2 Piece
3 Piece
Steel/ Bronze
3 Piece
Steel/ PTFE (Polytetrafluoroethylene - Teflon)
2 Piece
3 Piece
On the basis of PTFE lining type, the global maintenance free rod ends market can be segmented as follows:-
PTFE sintered bronze
PTFE fabric
PTFE FRP (Fibre reinforced plastic)
On the basis of lubrication, the global rod ends market can be segmented as follows:-
Lubricated
External lubrication – Grease
Self-lubrication – Teflon liner
Non-lubricated
Get access to full summary @: [URL]https://www.persistencemarketresearch.com/market-research/rod-ends-market.asp[/URL]