The process of maintaining mostly includes fixing cracked walls in your house that need your attention before they go too bad. Hence, [FURL=http://crackedwalls.com.au/]cracked wall repair[/FURL] always requires your attention in urgently to keep the matters from getting worse.

Let’s see how can we fix cracked walls in a minor amount of time without needing any major tools.

1. Fixing A Crack In Drywall

All the steps involved in fixing cracked drywall are mentioned in detail below.

I. First off, you need a joint compound. You can either buy it straight-away from the market, or if you want to save some money, you could also prepare it at home. However, it’s only recommended if you have some prior experience.

II. Remove any debris from inside of the crack which may prevent the compound from settling in. And cut a V-shaped notch to contain the compound inside it.

III. Now, start applying the compound on the cracks. Make sure you don’t just put a single coating. Rather, apply at least 2 to 3 coats and even more till it feels like fixed.

IV. Don’t start the next coating before the previous one is fully dried up and try to make the coating as thin as possible.

V. After you’re satisfied with the coating, use sandpaper to level the surface.

VI. Finally, put wall paint over the section to get done. You can also use a latex primer before applying the paint to make the paint fit in with the rest of the wall paint.

2. Fixing A Crack In Concrete Wall

[FURL=http://crackedwalls.com.au/]Cracked wall repair[/FURL] is relatively harder to implement when it comes to concrete walls. However, we have broken it down to steps to make it easy for you.

I. First and foremost, you need to expand the cracked surface to almost 1 inch to provide the patching material more area to grip. Use a hammer to get it done.

II. Now, you need to make sure that the crack is free from any dust particles. Otherwise, the patching material won't work as effectively. A vacuum or a brush is ideal for cleaning up the crack.

III. Now for the main task, use a thin brush to fill the crack with the adhesive to re-bond the cracked wall. Apply it deep inside the crack and on the edges making sure you don’t leave a single spot undone.

IV. Use a knife-like or a knife to patch the adhesive and make the coating clean on the crack.

V. Allow the coating to dry off.

VI. Keep applying multiple coatings whenever the previous one dries, unless you feel comfortable about the crack getting fixed.

VII. Stop coating when the crack apparently seems fixed.

VIII. Quickly mix-up the coating to the rest of the area of the wall as to make them look alike before it completely dries.